主机环境 RedHat6.5 64位
实验环境 ip 172.25.29.6
安装包 asciidoc-8.4.5-4.1.el6.noarch.rpm
Lvs-fullnat-synproxy.tar.gz
kernel-2.6.32-220.23.1.el6.src.rpm
newt-devel-0.52.11-3.el6.x86_64.rpm
slang-devel-2.2.1-1.el6.x86_64.rpm
防火墙状态：关闭
重新编译内核之前，要保证根分区要有20G的内存。
如果没有足够的空间就添加一块20G的虚拟磁盘
1．给根分区分用lvm分20G的空间（如果有足够的空间，就不用做拉伸了）
[root@server6 ~]# fdisk -l #查看分区
Disk /dev/vdc: 21.5 GB, 21474836480 bytes #新添加的磁盘
16 heads, 63 sectors/track, 41610 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
[root@server6 ~]# pvcreate /dev/vdc #用pv分成物理块
Physical volume"/dev/vdc" successfully created
[root@server6 ~]# pvs #查看，pv成功
PV VG Fmt Attr PSize PFree
/dev/vda2 VolGroup lvm2 a-- 8.51g 0
/dev/vdc lvm2 a-- 20.00g 20.00g
[root@server6 ~]# vgs #查看
VG #PV #LV #SN Attr VSize VFree
VolGroup 1 2 0 wz--n- 8.51g 0
[root@server6 ~]# vgextend VolGroup /dev/vdc #扩展VolGroup组
Volume group"VolGroup" successfully extended
[root@server6 ~]# vgs #查看
VG #PV #LV #SN Attr VSize VFree
VolGroup 2 2 0 wz--n- 28.50g 20.00g
[root@server6 ~]# lvextend -L 20G /dev/VolGroup/lv_root #扩展lv
Extending logicalvolume lv_root to 20.00 GiB
Logical volume lv_rootsuccessfully resized
[root@server6 ~]# df -lh #查看，根分区7.5G
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup-lv_root 7.5G 1.5G 5.7G 21% /
tmpfs 499M 0 499M 0% /dev/shm
/dev/vda1 485M 55M 405M 12% /boot
[root@server6 ~]# resize2fs /dev/VolGroup/lv_root #扩展文件系统
resize2fs 1.41.12 (17-May-2010)
Filesystem at /dev/VolGroup/lv_root is mounted on /; on-lineresizing required
old desc_blocks = 1, new_desc_blocks = 2
Performing an on-line resize of /dev/VolGroup/lv_root to5242880 (4k) blocks.
The filesystem on /dev/VolGroup/lv_root is now 5242880 blockslong.
[root@server6 ~]# df -lh #查看，根分区20G
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup-lv_root 20G 1.5G 18G 8% /
tmpfs 499M 0 499M 0% /dev/shm
/dev/vda1 485M 55M 405M 12% /boot
2. 重新编译内核，将fallnat模块添加到在内核及测试
A）重新编译内核
[root@server6 mnt]# ls
asciidoc-8.4.5-4.1.el6.noarch.rpm Lvs-fullnat-synproxy.tar.gz
kernel-2.6.32-220.23.1.el6.src.rpm newt-devel-0.52.11-3.el6.x86_64.rpm
lvs-fullnat-synproxy slang-devel-2.2.1-1.el6.x86_64.rpm
[root@server6 mnt]# rpm -vih kernel-2.6.32-220.23.1.el6.src.rpm #安装内核包
[root@server6 mnt]# yum install rpm-build -y #安装rpmbuild
[root@server6 mnt]# cd ~/rpmbuild/
[root@server6 rpmbuild]# ls
BUILD BUILDROOT RPMS SOURCES SPECS SRPMS
[root@server6 rpmbuild]# cd SPECS/
[root@server6 SPECS]# ls
kernel.spec
[root@server6 SPECS]# rpmbuild -bp kernel.spec #生成内核源码
error: Failed build dependencies:
redhat-rpm-config isneeded by kernel-2.6.32-220.23.1.el6.x86_64
patchutils is neededby kernel-2.6.32-220.23.1.el6.x86_64
xmlto is needed bykernel-2.6.32-220.23.1.el6.x86_64
asciidoc is needed bykernel-2.6.32-220.23.1.el6.x86_64
elfutils-libelf-develis needed by kernel-2.6.32-220.23.1.el6.x86_64
binutils-devel isneeded by kernel-2.6.32-220.23.1.el6.x86_64
newt-devel is neededby kernel-2.6.32-220.23.1.el6.x86_64
python-devel is neededby kernel-2.6.32-220.23.1.el6.x86_64
perl(ExtUtils::Embed)is needed by kernel-2.6.32-220.23.1.el6.x86_64
hmaccalc is needed bykernel-2.6.32-220.23.1.el6.x86_64
[root@server6 SPECS]# yum install redhat-rpm-config patchutilsxmlto elfutils-libelf-devel binutils-devel python-devel hmaccalcperl-ExtUtils-Embed -y #安装所缺少的包
[root@server6 SPECS]# cd /mnt/
[root@server6 mnt]# rpm -vihnewt-devel-0.52.11-3.el6.x86_64.rpm #安装编译内核时所需要的包
slang-devel-2.2.1-1.el6.x86_64.rpmasciidoc-8.4.5-4.1.el6.noarch.rpm
warning: newt-devel-0.52.11-3.el6.x86_64.rpm: Header V3 RSA/SHA1Signature, key ID c105b9de: NOKEY
Preparing... ########################################### [100%]
1:slang-devel ########################################### [ 33%]
2:newt-devel ###########################################[ 67%]
3:asciidoc ########################################### [100%]
[root@server6 mnt]#cd -
[root@server6 SPECS]# rpmbuild -bp kernel.spec
如果出现这种情况
则需：
[root@server6 ~]# yum provides */rngd #上面的图片提示，输入rngd -r /dev/urandom,查找命令所在的安装包
Loaded plugins: product-id, subscription-manager
This system is not registered to Red Hat SubscriptionManagement. You can use subscription-manager to register.
rng-tools-2-13.el6_2.x86_64 : Random number generator relatedutilities
Repo : rhel6.5
Matched from:
Filename :/etc/sysconfig/rngd
Filename : /sbin/rngd
Filename :/etc/rc.d/init.d/rngd
[root@server6 ~]# yum install rng-tools-2-13.el6_2.x86_64 -y #安装
[root@server6 ~]# rngd -r /dev/urandom #输入命令
#查看，运行通过
[root@server6 SPECS]# cd /mnt/
[root@server6 mnt]# ls
asciidoc-8.4.5-4.1.el6.noarch.rpm newt-devel-0.52.11-3.el6.x86_64.rpm
kernel-2.6.32-220.23.1.el6.src.rpm slang-devel-2.2.1-1.el6.x86_64.rpm
Lvs-fullnat-synproxy.tar.gz
[root@server6 mnt]# tar zxf Lvs-fullnat-synproxy.tar.gz #解压
[root@server6 mnt]# ls
asciidoc-8.4.5-4.1.el6.noarch.rpm Lvs-fullnat-synproxy.tar.gz
kernel-2.6.32-220.23.1.el6.src.rpm newt-devel-0.52.11-3.el6.x86_64.rpm
lvs-fullnat-synproxy slang-devel-2.2.1-1.el6.x86_64.rpm
[root@server6 mnt]# cd lvs-fullnat-synproxy/ #进入解压之后的包
[root@server6 lvs-fullnat-synproxy]# ls #查看
lvs-2.6.32-220.23.1.el6.patch README
lvs-tools.tar.gz toa-2.6.32-220.23.1.el6.patch
[root@server6 lvs-fullnat-synproxy]# cd~/rpmbuild/BUILD/kernel-2.6.32-220.23.1.el6/linux-2.6.32-220.23.1.el6.x86_64/
[root@server6 linux-2.6.32-220.23.1.el6.x86_64]# cp/mnt/lvs-fullnat-synproxy/lvs-2.6.32-220.23.1.el6.patch . #将刚查看的包移动到当前
[root@server6 linux-2.6.32-220.23.1.el6.x86_64]# patch-p1<lvs-2.6.32-220.23.1.el6.patch #打lvs的补丁
[root@server6 linux-2.6.32-220.23.1.el6.x86_64]# vimMakefile #进入，添加版本号，作为区别
4 EXTRAVERSION =-220.23.1.el6
[root@server6 linux-2.6.32-220.23.1.el6.x86_64]# make
[root@server6 linux-2.6.32-220.23.1.el6.x86_64]# makemodules_install #安装内核模块
[root@server6 linux-2.6.32-220.23.1.el6.x86_64]# makeinstall #安装
#在kernel一行中，添加“nohz=off ”（如果不关闭nohz，大压力下CPU0可能会消耗过高，压力不均匀）
[root@server6 linux-2.6.32-220.23.1.el6.x86_64]# vim/boot/grub/grub.conf #进入引导文件
10 default=0
16 kernel /vmlinuz-2.6.32-220.23.1.el6 roroot=/dev/mapper/VolGroup-lv_ rootnomodeset rd_NO_LUKS.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_sw ap SYSFONT=latarcyrheb-sun16crashkernel=auto rd_LVM_LV=VolGroup/lv_root KE YBOARDTYPE=pc KEYTABLE=usrd_NO_DM nohz=off rhgb quiet
[root@server6 linux-2.6.32-220.23.1.el6.x86_64]# reboot #重启
[root@server6 ~]# uname -r #查看版本号，编译成功
